Removing Transport Protection Materials For Fire Extinguishing Devices - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
Step 4 Remove protection films from the internal aisle floor of the FusionModule1000.
----End
13.2 Removing Transport Protection Materials for Fire
Extinguishing Devices
Prerequisites
The FusionModule1000 has been installed.
Context
Components on top of the aisles inside containers may fall off or be damaged due to strong
vibration during the FusionModule1000 transportation. Therefore, transport protection
materials are used to protect components such as smoke detectors, heat detectors, and
emergency lights.
Preparations
Tools: step ladder
Materials: none
Documents: fire extinguishing device layout diagram
Issue 02 (2017-01-10)
Figure 13-3 Removing transport fasteners from the compressor
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Removing Transport Protection Materials
89