Huawei FusionModule1000A20 Installation Manual page 53

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)

Before connecting the cable, verify that the cable is the pressure announciator cable by
checking the cable label.
 The cables are polarity insensitive.
Figure 9-3 Position of the cables to the pressure announciator
Step 6 Connect the interconnection terminal of the fire alarm control panel to the cable
interconnection terminal with a terminal resistor.


Issue 02 (2017-01-10)
Before connecting the cable, verify that the cable is the electromagnetic valve cable by checking the
cable label.
Connect the red wire to the red wire, and connect the black wire to the black wire.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Devices Inside Containers
46