Charging Extinguishant - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
Figure 9-4 Position of the interconnection cables
----End

9.2.1.2 Charging Extinguishant

Prerequisites


Preparations
Tools: platform scale, hose with a pressure tolerance greater than 2.5 MPa, gate valve,
camshaft device, pipe wrench, adjustable wrench
Materials: extinguishant charging cylinder with sufficient extinguishant, nitrogen cylinder
with sufficient nitrogen
Documents: fire extinguishing device installation position diagram (standard)
Skill requirement: fire engineer
Procedure
Step 1 Replace the electromagnetic valve of the fire cylinder with a camshaft device.
Issue 02 (2017-01-10)
The fire cylinder has passed the air-tightness test.
Tools and materials are ready.

All tools and materials except the camshaft device are provided by the charging station.

Extinguishant needs to be charged in the charging station.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Devices Inside Containers
47