Optional) Installing External Signal Cables - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
Preparations
Tools: hydraulic pliers, adjustable wrench, utility knife, diagonal pliers, crimping tool
Materials: cable tie, rubber pad, cable, terminal, heat shrink tubing
Document: external output power cable connection diagram
Skill requirement: skilled technicians
Procedure
Step 1 Obtain installation information such as the power cable model, terminal, and cable path based
on the external output power cable connection diagram.
Step 2 Determine the positions of devices to which output cables are to be connected and the wiring
terminals, and then route the cables based on the cable routes.
Step 3 Connect the cables by following the instructions in
----End

11.3 (Optional) Installing External Signal Cables

Prerequisites


Preparations
Tools: cable cutter, RJ45 crimping tool, network cable tester
Materials: cable ties, rubber washer, RJ45 connectors
Document: external signal cable connection diagram
Skill requirement: skilled technicians
Procedure
Step 1 Obtain installation information such as the signal cable model and cable path based on the
external signal cable connection diagram.
Step 2 Determine the positions of devices to which output cables are to be connected and the wiring
terminals, and then route the cables based on the cable routes.
Step 3 Install the signal cables by following the instructions in
----End
Issue 02 (2017-01-10)
Containers and external cable trays have been installed.
Monitoring devices have been installed inside containers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Connecting External Cables
10 Cable Installation Techniques.
10 Cable Installation Techniques.
84