Waterproof Metal Connector Cable Inlet - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)


Step 6 Connect the ferrule to the body and tighten the cover lock nut using a wrench.
Figure 10-9 Securing the DPJ end connector
Step 7 Apply waterproof silicone sealant to the joint between the connector and the sheet metal of
the container.
Figure 10-10 Applying sealant
Step 8 Spray water to test the waterproof performance of the DPJ end connector.
----End

10.6.2 Waterproof Metal Connector Cable Inlet

Only armored power cables among FusionModule1000 external cables are routed into feeder
windows using waterproof metal connectors.
Issue 02 (2017-01-10)
People inside and outside the container should work together to route the cable to the
specified connection position inside the container.
To facilitate operation during internal routing, you can remove some top plate in the
container aisle.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Cable Installation Techniques
77