Huawei FusionModule1000A20 Installation Manual page 82

It solution

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 IT Solution

Installation Guide (2016.05, AI Version)

Figure 10-4 DPJ end connector

(1) Body

(3) Ferrule

(5) Cover lock nut

Preparations

Tools: small cutter, scissors, wrench dedicated for feeder windows

Materials: waterproof silicone sealant

Document: none

Skill requirement: skilled technicians

Procedure

Step 1 Cut the plastic-coated metal hose to facilitate connection between the metal hose and the

ferrule.

Step 2 Remove the cover lock nut, guarding, and ferrule of the DPJ end connector using a wrench,

and remove the sealing rubber washer inside the connector.

Issue 02 (2017-01-10)

Use a small cutter or a pair of scissors to cut the hose at the joint between the

plastic-coated metal hose and the end connector at an angle of 30 to 45 degrees.

Figure 10-5 Cutting a hose

Trim away any burrs on the cut.

Huawei Proprietary and Confidential

10 Cable Installation Techniques

(2) Rubber washer

(4) Guarding

Table of Contents