Components Inside The Pre-Fab. Module; Overhead Cable Tray - Huawei FusionDC1000A Product Description

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)

3.6 Components Inside the Pre-fab. Module

3.6.1 Overhead Cable Tray

●
●
●
●
●
Figure 3-6 Overhead cable tray
(1) Overhead cable tray
Issue 04 (2023-11-10)
Dimensions of a single cable tray (H x W x D): 135 mm x 400 mm x 1950 mm
Cable trays are classified into strong-current cable trays and weak-current
cable trays, and positions for routing network cables and optical fibers are
reserved.
NO TE
If the customer has special requirements on network cable and optical fiber routing, grid
cable trays need to be customized.
Cable trays are assembled by section steel. Cable trays are separate from
cabinets and compatible with different cabinet arrangements.
Aluminum guide rails are deployed along the longer side of the pre-fab.
module and secured to the C-shaped beams at the top of the pre-fab.
module. Cable trays are secured to the aluminum guide rails using sliding
nuts.
The load-bearing capacity of cable trays is 150 kg/m.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Structural system
14