Replacing An Aisle Led Light - Huawei FusionModule2000 V500R002C03 Maintenance Manual

FusionModule2000 Smart Modular Data Cente
Maintenance Guide

6.4.18 Replacing an Aisle LED Light

Impact on the System
The aisle lighting will be affected.
Preparations


Context


Aisle LED lights should be laid out in parallel. The first and the last LED lights on aisle sides
should be connected in series. The LED lights should be installed on the skylight connective
plates. The light at either end can connect to a power cable to obtain power.
An LED light has male and female connectors at both ends for interconnection, as shown in
Figure
Figure 6-60 Interconnecting LED light tubes
Procedure
Step 1 Locate a failed light.
Issue 03 (2019-12-04)
Tool: ESD gloves
Material: LED light
Power to the aisle LED light has been disconnected.
During replacement, do not touch any end of the light with bare hands. You will get an
electric shock if you touch bare electrodes.
6-60.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
87