Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Cente
Maintenance Guide
3.
Figure 6-14 Removing a hard drive
Step 3 Install a new hard drive.
1.
2.
3.
Figure 6-15 Installing a new hard drive
Step 4 Observe the hard drive indicator to check whether the hard drive works properly.
----End
Issue 03 (2019-12-04)
Use a screwdriver to loosen the screws from the hard drive and remove the hard drive, as
shown by (3) and (4) in
Secure the hard drive to the front panel using a screwdriver, as shown by (1) and (2) in
Figure
6-15.
Push the hard drive into the subrack along the guide rails until it cannot move forwards,
as shown by (3) in
Figure
Close the ejector lever and push the hard drive in position, as shown by (4) in
6-15.
Copyright © Huawei Technologies Co., Ltd.
Figure
6-14.
6-15.
6 Parts Replacement
Figure
52
Advertisement
Table of Contents
