Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Cente
Maintenance Guide
Figure 6-6 Removing the general input unit panel
Step 7 Open the general input unit shell, test the copper busbar inside the general input unit using an
electroprobe, and go to the next step if the busbar is not energized.
Figure 6-7 Testing the busbar energized or not
Step 8 Remove cables from the general input unit using a 13# socket wrench and a 6# hex key.
Issue 03 (2019-12-04)
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
42
Advertisement
Table of Contents
