Replacing A Camera - Huawei FusionModule2000 V500R002C03 Maintenance Manual

Smart modular data center

Table of Contents

FusionModule2000 Smart Modular Data Cente

Maintenance Guide

Step 4 Insert the new power supply module into the subrack until the ejector lever is locked and the

bottom is reached.

Step 5 Connect the power cable to the new power supply module.

Step 6 If the running status indicator is steady green, the new power supply module works properly.

----End

6.4.2.3 Replacing a Camera

Impact on the System

The operation of the video surveillance system will be interrupted.

Preparations



Procedure

Step 1 Unscrew and remove the front cover from the camera.

Figure 6-17 Removing the front cover from a camera

Step 2 Remove the screws from the camera.

Issue 03 (2019-12-04)

Tools: ESD wrist strap, ESD gloves, step ladder, labels, marker, Phillips screwdriver

Material: camera

6 Parts Replacement

Table of Contents

Fusionmodule2000