Replacing An Ambient T/H Sensor - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Figure 4-9 Removing the fuse terminal block
Step 2 Remove the blown fuse and install a new one.
Step 3 Reinstall the fuse terminal block in the PDC.
Step 4 Check whether the new fuse works properly.
----End
Follow-up Procedure
Dispose of the removed fuse that is confirmed faulty.

4.1.8.7 Replacing an Ambient T/H Sensor

Prerequisites
A spare ambient T/H sensor of the same model is available and functional.
Impact on the System
None
Preparations
Tools: key to the cabinet door, diagonal pliers
Materials: spare ambient T/H sensor, cable tie
Documents: none
Skill requirement: power distribution engineer
Issue 01 (2019-03-05) Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
63