Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 23

FusionModule1000A40 ICT Solution
Maintenance Guide
Categ
ory
tion
system
ECC80
0
WebUI
Fire
extingu
ishing
system
Issue 01 (2019-03-05)
Mainten Operation
ance
Item
Check the SPD
indicator and
SPD circuit
breaker status.
Check On the ECC800
FusionMo WebUI, choose
dule1000 Home > Active
alarms. Alarms or
Query >
Historical
Alarms.
Camera On the ECC800
images WebUI, choose
and System
coverage Settings > Video
Settings >
Video
Information in
the monitoring
system, and you
can click Access
Link on the page
to access the
video link.
VESDA Check the
and its working status of
power the VESDA and
supply its power supply.
Copyright © Huawei Technologies Co., Ltd.
Check Troubleshooting
Standard
The SPD If the SPD indicator is red,
indicator is replace the SPD. For
green. details, refer to 4.1.8.4
Replacing the SPD in a
PDC.
1. If the SPD indicator is
The SPD circuit
breaker is
switched to ON.
2. Switch on the circuit
No alarm is Refer to ECC800 Data
displayed in the Center Controller
alarm V100R001C30 User
information Manual or iManager
area. NetEco documentation.
Alarm short Check whether the SIM
messages can be card is properly installed. If
received. the SIM card is faulty,
replace it by following
instructions in ECC800
Data Center Controller
V100R001C30 User
Manual.
The video If no video image is
images are displayed:
properly
1. Connect the camera
displayed.
2. If the cable is correctly
The coverage of If the camera coverage does
the camera is not meet the monitoring
optimal. requirement, adjust the
camera coverage.
The VESDA If the VESDA or its power
and its power supply is abnormal,
supply are troubleshoot by following
normal. instructions in documents
delivered with the VESDA.
3 Routine Maintenance
red, replace the SPD.
For details, refer to
4.1.8.4 Replacing the
SPD in a PDC.
breaker.
cable again.
connected, replace the
camera by following
instructions in 4.3.6
Replacing a Camera.
16