Fire Extinguishing System (Ce) - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Device
Smoke
detector
Heat
detector

3.5.5 Fire Extinguishing System (CE)

Table 3-8 Monthly maintenance checklist for the fire extinguishing system
Device
Extinguisha
nt control
panel
Batteries of
the fire
alarm
control
panel and
VESDA
Fire
extinguishe
r
Issue 01 (2019-03-05)
Operation
Check the power
indicator.
Unplug the input
power supply.
Check the smoke
detector indicator.
Check the heat
detector indicator.
Operation
Check indicators
on the
extinguishant
control panel.
Check the battery
terminals.
Check the
appearance of the
fire cylinder,
electrical actuator,
pneumatic switch,
fire extinguishing
Copyright © Huawei Technologies Co., Ltd.
Check Troubleshooting
Standard
The power Replace by following instructions in
indicator is 4.4.1.11 Replacing an Emergency
steady green, Light (Standard).
and the fault
indicator is off.
The Replace by following instructions in
emergency 4.4.1.11 Replacing an Emergency
light turns on, Light (Standard).
the power
indicator turns
off, and the
fault indicator
turns off.
The indicator Replace by following instructions in
blinks once 4.4.1.1 Replacing a Smoke Detector
every 6s. (Standard).
The indicator Replace by following instructions in
blinks once 4.4.1.2 Replacing a Heat detector
every 6s. (Standard).
Check Standard
The power indicator
turns on, and the
alarm indicator
turns off.
The wiring
terminals are in
good condition
without corrosion.
All devices of the
fire extinguisher are
intact, free from
deformation and
mechanical damage.
3 Routine Maintenance
Maintenance Guide
Replace by following
instructions in 4.4.2.10
Replacing the Extinguishant
Control Panel (CE).
Clean the contaminated and
corroded terminals. Replace
batteries with severely
corroded terminals by referring
to 4.4.2.8 Replacing Batteries
for the Extinguishant Control
Panel (CE) or 4.4.3 Replacing
Batteries for the VESDA
Power Box.
Replace the fire cylinder by
referring to 4.4.2.9 Replacing a
Fire Cylinder (CE). For details
about how to replace other
devices, contact Huawei
technical support.
24