Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 142

FusionModule1000A40 ICT Solution
Maintenance Guide
Figure 4-76 Removing the fixing plate
Step 3 Remove cables from the fire alarm control panel batteries, and remove the batteries.
Step 4 Install the new batteries to the proper positions of the fire alarm control panel.
Step 5 Connect battery cables to the fire alarm control panel in the same way.
Figure 4-77 Connecting battery cables
Distinguish the positive and negative battery terminals when connecting battery cables.
Step 6 Use a Phillips screwdriver to secure the battery fixing plate.
Issue 01 (2019-03-05) Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
135