Replacing A Heat Detector (Standard) - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Step 6 Hold the new smoke detector body, align the smoke detector indicator with the position
shown by (1) in Figure 4-63, and turn the detector body clockwise to the position shown by (2)
in Figure 4-63 to install the smoke detector.
Figure 4-63 Smoke detector installation reference line
Step 7 Power on the fire alarm control panel after verifying that the new smoke detector is properly
installed.
Step 8 Check whether the new smoke detector is working properly.
----End
Follow-up Procedure
Dispose of the removed smoke detector that is confirmed faulty.

4.4.1.2 Replacing a Heat detector (Standard)

Prerequisites
A spare heat detector of the same model is available and functional.
Impact on the System
The fire extinguishing system stops working during the replacement.
Preparations
Tools: protective gloves, step ladder, Phillips screwdriver
Materials: spare heat detector
Documents: fire extinguishing device layout diagram (standard)
Skill requirement: fire engineer
Issue 01 (2019-03-05)
If the red indicator blinks once every 6s, the smoke detector is working properly.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
122