Optional) Replacing A Cim - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Follow-up Procedure
Dispose of the removed pad that is confirmed faulty.

4.3.15 (Optional) Replacing a CIM

Prerequisites
A spare CIM of the same model is available and functional.
Impact on the System
None
Preparations
Tool: Phillips screwdriver
Materials: spare CIM
Documents: iBAT 2.0-CIM01C2 User Manual
Skill requirement: extra low voltage (ELV) engineer
Procedure
Step 1 Clear the network parameters for all the BIMs managed by the CIM to be replaced.


Step 2 Remove and label CIM cables.
Step 3 Remove the CIM from the fastener.
Figure 4-59 Removing a CIM
Step 4 Record the DIP switch address of the CIM.
Issue 01 (2019-03-05)
If the CIM is damaged, manually clear the network parameters for all the BIMs managed
by the CIM by holding down the networking switch for the BIM.
If the CIM is not damaged, hold down the networking switch for the CIM to clear the
current network (including the network parameters for all the BIMs managed by the CIM).
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
118