Replacing An Exit Button - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Step 6 Reconnect the interconnection terminals, and close the door of the IC card reader box.
Step 7 Check that the new IC card reader is working properly.
----End
Follow-up Procedure
Dispose of the removed IC card reader that is confirmed faulty.

4.3.11.2 Replacing an Exit Button

Prerequisites


Impact on the System
None
Preparations
Tools: insulation tape, Phillips screwdriver, small-sized flat-head screwdriver, protective
gloves
Material: spare exit button
Documents: none
Skill requirement: weak-current engineer
Procedure
Step 1 Disassemble the faulty exit button, remove cables, and remove the faulty exit button, as
shown in Figure 4-53.
Issue 01 (2019-03-05)
The IC card reader is working properly if the container door can be opened from outside the container
using an access card and door opening operations are logged in the monitoring system.
An exit button needs to be replaced.
A spare exit button of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
109