Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 78

FusionModule1000A40 ICT Solution
Maintenance Guide
3.
4.
Step 3 Remove the decorative beam at the entrance to the cold aisle.
Assign two persons to remove a decorative beam together. One person holds up the decorative
beam, while the other person removes the fasteners.
Figure 4-14 Removing a decorative beam
1.
2.
Step 4 (Optional) Remove the bolts securing the sealing plate at the rear top of the air conditioner
using a Phillips screwdriver, and remove the sealing plate.
The sealing plate at the rear top needs to be removed when air conditioner A1, B1, or C1 is
replaced. Air conditioner D1 does not have the sealing plate.
Issue 01 (2019-03-05)
Two persons work together to push up the suspended ceiling at the cabinet side to
unhook the suspended ceiling, and remove the suspended ceiling from the lower right
corner.
Remove the suspended ceiling behind the air conditioner in the same way.
Remove the sealing ring from the decorative beam.
Remove bolts securing the decorative beam using a Phillips screwdriver, and remove the
decorative beam.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
71