Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 112

FusionModule1000A40 ICT Solution
Maintenance Guide
Procedure
Step 1 Use the screwdriver delivered with the camera to loosen the screws on the front cover of the
camera, remove the front cover, and take out the inner cover over the lens.
Figure 4-47 Removing the front and inner covers
Step 2 Remove the faulty SD card from the SD card slot.
Step 3 Insert a new SD card into the SD card slot.
Figure 4-48 Installing an SD card
Step 4 Reinstall the inner and front covers.
----End
Follow-up Procedure
Dispose of the removed SD card that is confirmed faulty.
Issue 01 (2019-03-05) Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
105