Siemens Sinumerik 840D sl Diagnostic Manual page 625

03/2009
Program Con- Internal
tinuation:
142002 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142003 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142004 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142005 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142006 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142007 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program Con- Internal
tinuation:
142008 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
HMI-Alarms
2-625