Siemens Sinumerik 840D sl Diagnostic Manual page 1016
Hide thumbs
Also See for Sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Overview of Alarms
PLC alarms
400601
Configuration loading points incorrect
Definitions:
The PLC configuration in the DB4 does not match the NC configuration
Reaction:
Alarm display.
Remedy:
Correct tool management start-up
Program Con-
Switch control OFF - ON.
tinuation:
400602
Spindle configuration incorrect
Definitions:
The PLC configuration in the DB4 does not match the NC configuration
Reaction:
Alarm display.
Remedy:
Correct tool management start-up
Program Con-
Switch control OFF - ON.
tinuation:
400603
Revolver configuration incorrect
Definitions:
The PLC configuration in the DB4 does not match the NC configuration
Reaction:
Alarm display.
Remedy:
Correct tool management start-up
Program Con-
Switch control OFF - ON.
tinuation:
400604
Set change with M06 in the machine data
Definitions:
With the magazine type used (box magazine, chain), changing is possible only with M06. If necessary,
also check for impermissible settings at revolver magazines.
Reaction:
Alarm display.
Remedy:
Set the value in the channel-specific machine data TOOL_CHANGE_MODE (MD 22550) to 1.
Program Con-
Internal
tinuation:
400902
Parameter ChanNo impermissible in FC 9
Definitions:
The parameterized channel does not exist.
Reaction:
Alarm display.
Remedy:
Correct the parameter.
Program Con-
Switch control OFF - ON.
tinuation:
400903
Parameter IntNo impermissible in FC 9
Definitions:
The parameterized interrupt does not exist.
Reaction:
Alarm display.
Remedy:
Correct the parameter.
Program Con-
Switch control OFF - ON.
tinuation:
401003
FC 10 system error 0x8083
Definitions:
System error SFC52 has occurred.
Reaction:
Alarm display.
Remedy:
Restart, contact the Siemens AG A&D MC Hotline with the error text.
Program Con-
Switch control OFF - ON.
tinuation:
401004
FC 10 system error 0x8084
Definitions:
System error SFC52 has occurred.
Reaction:
Alarm display.
Remedy:
Restart, contact the Siemens AG A&D MC Hotline with the error text.
Program Con-
Switch control OFF - ON.
tinuation:
2-1016
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009
Hide quick links:
Advertisement
Table of Contents
