Siemens Sinumerik 840D sl Diagnostic Manual page 571

03/2009
101134 MDx407 SPEEDCTRL_GAIN_1 could not be calculated
Definitions: --
Remedy: --
101135 MDx409 SPEEDCTRL_INTEGRATOR_TIME_1 could not be calculated
Definitions: --
Remedy: --
101136 MDx150 FIELDCTRL_GAIN could not be calculated
Definitions: --
Remedy: --
101137 MDx141 MAGNETIZING_REACTANCE = 0
Definitions: --
Remedy: --
101138 MDx139/MDx140 MD_STATOR-/ROTOR_LEAKAGE_REACTANCE = 0
Definitions: --
Remedy: --
101139 MDx134 MOTOR_NOMINAL_FREQUENCY = 0
Definitions: --
Remedy: --
101140 MDx138 ROTOR_COLD_RESISTANCE = 0
Definitions: --
Remedy: --
101141 MDx117 MOTOR_INERTIA = 0
Definitions: --
Remedy: --
101142 MDx146< MDx142
MOTOR_MAX_ALLOWED_SPEED<FIELD_WEAKENING_SPEED
Definitions: --
Remedy: --
101143 MDx142 FIELD_WEAKENING_SPEED = 0
Definitions: --
Remedy: --
101144 MDx118 MOTOR_STANDSTILL_CURRENT = 0
Definitions: --
Remedy: --
101145 MD1104/1118
MOTOR_MAX_CURRENT/MOTOR_STANDSTILL_CURRENT > 900.0
Definitions: --
Remedy: --
101146 Boot file(s) saved
Definitions: Saving the boot file in the start-up area, image drive machine data, was successful.
Remedy: --
101147 Boot file(s) deleted
Definitions: Deleting the boot file in the start-up area, image drive machine data, was successful.
Remedy: --
101148 Controller MD calculated
Definitions: Calculating the controller data in the start-up area, image drive machine data, was successful.
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
HMI-Alarms
2-571