Siemens Sinumerik 840D sl Diagnostic Manual page 597

03/2009
107034 MCU: Error in table management block
Definitions: --
Remedy: --
107035 MCU: Tool data not saved
Definitions: --
Remedy: --
107036 MCU: Tool data not stored on FEPROM
Definitions: --
Remedy: --
107041 MCU: Incorrect value for work offset
Definitions: --
Remedy: --
107042 MCU: Incorrect value for feedrate
Definitions: --
Remedy: --
107043 MCU: Value of traversing path / position incorrect
Definitions: --
Remedy: --
107050 MCU: Program is running, cannot be selected !
Definitions: --
Remedy: --
107051 MCU: Please wait, reading traversing program !
Definitions: --
Remedy: --
107052 MCU: Please wait, transferring traversing program !
Definitions: --
Remedy: --
107053 MCU: Traversing program exists already !
Definitions: --
Remedy: --
107054 MCU: Traversing program not available !
Definitions: --
Remedy: --
107055 MCU: Active program cannot be changed !
Definitions: --
Remedy: --
107058 MCU: Transfer of traversing program terminated without errors!
Definitions: --
Remedy: --
107059 MCU: Transfer of traversing program aborted !
Definitions: --
Remedy: --
107061 MCU: Program number exists already!
Definitions: --
Remedy: --
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
HMI-Alarms
2-597