Siemens Sinumerik 840D sl Diagnostic Manual page 1017

03/2009
401005 FC 10 system error 0x8085
Definitions: System error SFC52 has occurred.
Reaction: Alarm display.
Remedy: Restart, contact the Siemens AG A&D MC Hotline with the error text.
Program Con- Switch control OFF - ON.
tinuation:
401006 FC 10 system error 0x8086
Definitions: System error SFC52 has occurred.
Reaction: Alarm display.
Remedy: Restart, contact the Siemens AG A&D MC Hotline with the error text.
Program Con- Switch control OFF - ON.
tinuation:
401007 FC 10 system error 0x8087
Definitions: System error SFC52 has occurred.
Reaction: Alarm display.
Remedy: Restart, contact the Siemens AG A&D MC Hotline with the error text.
Program Con- Switch control OFF - ON.
tinuation:
401502 Impermissible axis no. parameter in FC 15
Definitions: The parameterized axis does not exist.
Reaction: Alarm display.
Remedy: Correct the parameter.
Program Con- Switch control OFF - ON.
tinuation:
401602 Impermissible axis no. parameter in FC 16
Definitions: The parameterized axis does not exist.
Reaction: Alarm display.
Remedy: Correct the parameter.
Program Con- Switch control OFF - ON.
tinuation:
401702 Impermissible spindle IF no. parameter in FC 17
Definitions: The parameterized spindle does not exist.
Reaction: Alarm display.
Remedy: Correct the parameter.
Program Con- Switch control OFF - ON.
tinuation:
401805 Impermissible axis no. parameter in FC 18
Definitions: The parameterized axis / spindle does not exist.
Reaction: Alarm display.
Remedy: Correct the parameter.
Program Con- Switch control OFF - ON.
tinuation:
401901 Parameter BAGNo impermissible in FC19
Definitions: The parameterized mode group, channel does not exist.
Reaction: Alarm display.
Remedy: Correct the parameter.
Program Con- Switch control OFF - ON.
tinuation:
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
PLC alarms
2-1017