Siemens Sinumerik 840D sl Diagnostic Manual page 588

Overview of Alarms
HMI-Alarms
104203 Blank in tool identifier not allowed
Definitions: --
Remedy: --
104204 No new tool created
Definitions: --
Remedy: --
104205 Tool exists already
Definitions: --
Remedy: --
104206 No magazine available
Definitions: --
Remedy: --
104207 The magazine is not defined
Definitions: --
Remedy: --
104208 The tool size (L, R, T, B) must have a value between 1 and 7
Definitions: --
Remedy: --
104209 Dummy tool cannot be created
Definitions: --
Remedy: --
104210 Tool not available
Definitions: --
Remedy: --
104211 Tool number equals 0
Definitions: --
Remedy: --
104212 Tool already loaded
Definitions: --
Remedy: --
104213 Location already loaded
Definitions: --
Remedy: --
104214 Error on positioning magazine
Definitions: --
Remedy: --
104215 Error on unloading tools
Definitions: --
Remedy: --
104216 Error on relocating tools
Definitions: --
Remedy: --
104217 Error on loading tools
Definitions: --
Remedy: --
2-588
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009