Siemens Sinumerik 840D sl Diagnostic Manual page 1023

03/2009
428627 Restoration of DP slave, parameterization error, bus: %2, slave: %1
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428628 Restoration of DP slave, discrepancy between preset and actual
configurations, bus: %2, slave: %1
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428630 Failure of the PROFINET IO system
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428631 Failure of a PROFINET device, device: %Z
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428632 Restoration of PROFINET device with fault, device %Z
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428633 Restoration of PROFINET device, discrepancy between preset and actual
configurations, device %Z
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
428634 Restoration of PROFINET device, parameterization error, device %Z
Definitions: OB82 or OB86 has been triggered.
Reaction: Alarm display.
Remedy: Rectify the cause of the error displayed
Program Con- Switch control OFF - ON.
tinuation:
800000 Error: HiGraph group no. %A graph no. %N status %Z
Definitions: -
Reaction: Alarm display.
Remedy: -
Program Con- Internal
tinuation:
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
PLC alarms
2-1023