Input X Parameter Window; Input - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Parameters
7.11

Input x parameter window

In the following, the possible settings for inputs a...c are explained using input a as an example.
The setting options are identical for all inputs.
When using input a to connect an analog room control unit, parametrize the input on the Setpoint
adjustment page.
Fig. 21: Input x parameter window
7.11.1

Input

Options:
This parameter sets the type of operation for the input. Dependent parameters appear according to the
selected option.
172 2CDC508220D0211 Rev. A | VC/S 4.x.1
Note
Note
Deactivated
Window contact
Dew point sensor
Fill level sensor
Temperature sensor
Binary signal input
Analog room control unit