®
ABB i-bus
KNX
Product Overview
3.4.3.2
KNX operation
Button/LED
Valve output X
message and
reset
Manual
operation
Inputs a...x
Table 8: Operating and display elements – KNX operation
22 2CDC508220D0211 Rev. A | VC/S 4.x.1
Description
Button without function
Button without function
Error
Activates KNX mode with a short
press of the button
No button
LED indicator
On: Valve control value greater than 0 %
Off: Valve control value equal to 0 %
Flashing: Indicates a fault,
e.g. overload/short circuit
On: Indication of an output malfunction on at least
one output
On: The device is in Manual
Off: The device is in the KNX mode
Binary sensor:
LED on: Contact closed
LED off: Contact open
Temperature sensor:
LED on: Temperature sensor connected
LED flashing: Error (cable break/short circuit)