®
ABB i-bus
KNX
Parameters
7.11.1.4.2
—
Dependent parameter
Temperature offset
Options:
A maximum offset of ±10 °C can be added to the recorded temperature with this parameter.
7.11.1.4.3
—
Dependent parameter
Cable error compensation
Options:
•
Via cable length: Cable error is compensated by entering the cable length.
This method may only be used for copper cables.
•
Via cable resistance: Cable error is compensated by entering the cable resistance value.
–10.0...00.0...+10.0 K
None
Via cable length
Via cable resistance
Note
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 181