ABB i-bus KNX Product Manual page 172

®
ABB i-bus KNX
Parameters
7.10.1.1.8 —
Dependent parameter
Reset manual adjustment via KNX using group object
This parameter is only displayed if you select No when setting Connect analog room control unit to
physical device input a.
Options:
When this option is activated, the manual adjustment can be cleared at any time via the Reset manual
setpoint adjustment group object.
Selecting No hides the group object Reset manual setpoint adjustment and it is no longer possible to reset
the manual setpoint adjustment via a group object.
Example:
Resetting manual adjustment of all the devices in a building using a time scheduler in the system.
7.10.1.1.9 —
Dependent parameter
Slave display indicates
This parameter is only displayed if you select No when setting Connect analog room control unit to
physical device input a.
Options:
This parameter determines whether a slave displays a setpoint as absolute or relative.
Example:
Resetting manual adjustment of all the devices in a building using a time scheduler in the system.
170 2CDC508220D0211 Rev. A | VC/S 4.x.1
No
Yes
Absolute
Relative