Manual Operation Parameter Window; Manual Operation - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Parameters
7.3

Manual operation parameter window

Fig. 9: Manual operation parameter window
7.3.1

Manual operation

Options:
This parameter defines if the changeover between the operating states Manual operation and KNX
operation is possible via the Manual operation button on the device.
•
Enabled: The operating states Manual operation and KNX operation can be switched over via the
Manual operation button. The Enable/disable manual operation and Status Manual operation group
objects are enabled.
The Enable/disable manual operation group object makes it possible to enable or disable manual
operation via the bus.
The Status Manual operation group object indicates whether manual operation is active or inactive.
The group object is sent automatically after a change.
•
Disabled: Manual operation is generally disabled.
Enabled
Disabled
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 43