ABB i-bus KNX Product Manual page 186

®
ABB i-bus KNX
Parameters
7.11.1.4.5 —
Dependent parameter
Send temperature value
Options:
This parameter defines how the output value should be sent.
•
After a change: Sends the output value after a change.
•
Cyclically: Sends the output value cyclically.
•
After a change and cyclically: Sends the output value after a change, and cyclically.
•
On request: Sends the output value on request.
•
After a change or on request: Sends the output value after a change and after a request.
•
On request and cyclically: Sends the output value on request, and cyclically.
•
After a change or request and cyclically: Sends the output value after a change, on request,
and cyclically.
The value is sent on request on the receipt of a value in the General – Request status values group object.
184 2CDC508220D0211 Rev. A | VC/S 4.x.1
After a change
Cyclically
After a change and cyclically
On request
After a change or on request
On request and cyclically
After a change or request and cyclically