Mitsubishi Electric Melsec iQ-R Series User Manual page 67

• When "PC side I/F" is set to "Ethernet board" and "Connect module" is set to the item other than "CPU module" in step 3
• When "Protocol" is set to "TCP"
Protocol setting made in step 4
TCP
UDP
7.
Click the [Next >] button.
8.
Set a network route in the "Transfer Setup Wizard - Network" window.
• USB
Item
Station type
CPU series
9.
Click the [Next >] button.
Communication setting item
Module type
Host(IP Address)
Network No
Station No
Module type
Ethernet port direct connection
Host(IP Address)
Network No
Station No
Adapter
Description
This item is used to select where to mount the A/D converter module. Select "Host station" in this step.
■Setting range
• Host station
• Other station
This item is used to select the series of the destination CPU module. Select "RCPU" in this step.
■Setting range
• QCPU
• RCPU
• LCPU
• When "Protocol" is set to "UDP"
Description
This item automatically sets the setting made in "Connect module" in step 4.
This item is used to set a host name (IP address) of the destination Ethernet
module.
Automatically sets the setting made in "Network No." in step 4.
Sets a station number of the destination Ethernet module.
This item automatically sets the setting made in "Connect module" in step 4.
This checkbox is selected when the module is connected to the Ethernet
module directly by the Ethernet port.
This item is used to set a host name (IP address) of the destination Ethernet
module.
Automatically sets the setting made in "Network No." in step 4.
This item is used to set a station number of the destination Ethernet
module.
This item is used to select an adapter of the personal computer when
"Ethernet port direct connection" is selected.
• Ethernet board
3 CommDTM
65
3.4 Connection Settings
3