Mitsubishi Electric Melsec iQ-R Series User Manual page 115

Hart-enabled analog-digital converter module
Hide thumbs Also See for Melsec iQ-R Series:
Table of Contents

Advertisement

CH1 Averaging process specification
Set the processing to be performed among the sampling processing, averaging processing, and filter processing.
Setting value
0
1
2
3
4
If a value other than the above values is set, an averaging process specification setting range error (error code: 191H)
occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Averaging process specification
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is Sampling processing (0) for all channels.
CH1 Time average/Count average/Moving average/Primary delay filter constant setting
Set the time (for averaging), count (for averaging), moving average count, and primary delay filter constant for when Time
average (1), Count average (2), Moving average (3), or Primary delay filter (4) is set in 'CH1 Averaging process specification'
(Un\G501).
The following table lists the setting ranges.
Setting value
320 to 5000 (ms)
4 to 500 (times)
2 to 1000 (times)
1 to 500 (times)
If a value other than the above is set, any of a time average setting range error (error code: 192H), count average setting
range error (error code: 193H), moving average setting range error (error code: 194H), or primary delay filter constant
setting range error (error code: 195H) occurs, and the A/D conversion processing is performed with the setting before the
occurrence of the error.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Time average/Count average/Moving average/Primary
delay filter constant setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 0 for all channels.
Setting details
Sampling processing
Time average
Count average
Moving average
Primary delay filter
CH1
501
CH1
502
CH2
CH3
CH4
CH5
701
901
1101
1301
Setting details
Time average
Count average
Moving average
Primary delay filter constant
CH2
CH3
CH4
CH5
702
902
1102
1302
Appendix 3 Buffer Memory Areas
CH6
CH7
CH8
1501
1701
1901
CH6
CH7
CH8
1502
1702
1902
APPX
113
A

Advertisement

Table of Contents
loading

Table of Contents