Mitsubishi Electric Melsec iQ-R Series User Manual page 66

6.
Set "Communication setting" in the "Transfer Setup Wizard - PLC side" window. The setting details differ depending on
the settings made in steps 3 and 4.
• When "PC side I/F" is set to "USB" in step 3
Communication setting item
CPU series
• When "PC side I/F" is set to "Ethernet board" and "Connect module" is set to "CPU module" in step 3
• When "Protocol" is set to "TCP"
Protocol setting made in step 4
TCP
UDP
3 CommDTM
64
3.4 Connection Settings
Description
This item is used to select the series of the destination CPU module.
■Setting range
• QCPU
• RCPU
• LCPU
Communication setting item
Host(IP Address)
Ethernet port direct connection
Host(IP Address)
Adapter
• When "Protocol" is set to "UDP"
Description
Sets a host name (IP address) of the destination CPU module.
The set host name can be read from the connected CPU module by clicking
the [Find CPU (Built-in Ethernet port) on network] button.
This checkbox is selected when the module is connected to the CPU
module directly by the Ethernet port.
This item is used to set a host name (IP address) of the destination CPU
module.
The set host name can be read from the connected CPU module by clicking
the [Find CPU (Built-in Ethernet port) on network] button.
This item is used to select an adapter of the personal computer when
"Ethernet port direct connection" is selected.