Mitsubishi Electric Melsec iQ-R Series User Manual page 65

3.
Select a connection interface of the personal computer in "PC side I/F" of the "Transfer Setup Wizard - PC side" window.
• USB
4.
Set the details of "Communication setting" corresponding to the selected "PC side I/F".
PC side I/F Communication setting item
USB Time out
Ethernet board Connect module
Protocol
Network No
Port No
Station No
Time out
5.
Click the [Next >] button.
• Ethernet board
Setting details
This item is used to set time until connection with the connection destination times
out.
■Setting range
1 to 2147483647ms
This item is used to select a type of a module connected from a personal computer.
■Setting range
• QJ71E71
• RJ71EN71
• LJ71E71
• CPU module
This item is used to select a predefined protocol.
■Setting range
• TCP
• UDP
This item is used to set a network number.
■Setting range
1 to 239
This item is used to set a UDP port number.
■Setting range
0 to 65535
Some port numbers cannot be used depending on the destination module. (
Manual of each module)
This item is used to set a station number of the Ethernet board.
■Setting range
• QJ71E71 and LJ71E71: 1 to 64
• RJ71EN71: 1 to 120
This item is used to set time until connection with the connection destination times
out.
■Setting range
1 to 2147483647ms
3 CommDTM
63
3.4 Connection Settings
3