Mitsubishi Electric Melsec iQ-R Series User Manual page 151

4.
Configure the setting to use the module labels and add the module labels of the master/local module.
5.
Set "Required Settings" of "Module Parameter" of the master/local module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Required Settings]
6.
Set "Network Configuration Settings" of "Module Parameter" of the master/local module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Network
Configuration Settings]
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
149