Setting; Testing - ABB REC 561 User Manual

1MRK 580 150-XEN
Page 6 - 50

5 Setting

6 Testing

Apparatus control
The setting parameters are accessible through the CAP 531 configuration
tool. The parameters for the apparatus control modules consist only of
time settings.
The appendix shows the parameters and their setting ranges.
The apparatus control function consists of four types of function blocks,
which are connected in a delivery-specific way between bays and to the
station level. For that reason, test the total function in a system, that is,
either in a complete delivery system as an acceptance test (FAT/SAT) or
as parts of that system.
ABB Network Partner AB
Version 1.0-00