ABB REC 561 User Manual page 65

1MRK 580 166-XEN
Page 3 - 16
Event message:
INT--FAIL
INT--FAIL
INT--WARNING
INT--WARNING
INT--CPUFAIL
INT--CPUFAIL
INT--CPUWARN Off
INT--CPUWARN
INT--ADC
INT--ADC
INT--IOn
INT--IOn
INT--RTC
INT--RTC
INT--TSYNC
INT--TSYNC
DREP-MEMUSED On >80% of the disturbance recording memory
SETTING CHANGED
DISTREP CLEARED
Installation and commissioning
• Self-supervision summary = INT--FAIL and INT--WARNING
• CPU-module status summary = INT--CPUFAIL and INT--CPU-
WARN
When an internal fault has occurred, you can retrieve extensive informa-
tion about the fault from the list of internal events available in the TERM-
STS Terminal Status part of the PC program. A time-tagged list with the
date and time of the last 40 internal events is available here.
The internal events in this list not only refer to faults in the terminal, but
also to other activities, such as change of settings, clearing of disturbance
reports, and loss of external time synchronization.
These events are logged as Internal events:
Description:
Off Internal fail status
On
Off Internal warning status
On
Off Main processing module fatal error status
On
Main processing module non-fatal error status INT--CPUWARN (reset event)
On
Off A/D conversion module status
On
Off In/Out module No n status
On
Off Real Time Clock (RTC) status
On
Off External time synchronisation status
On
used
Any settings in terminal changed
All disturbances in Disturbance report cleared
The events in the Internal event list are time tagged with a resolution of
1 ms.
This means that using the PC for fault tracing provides information on
the:
• Module that should be changed
• Sequence of faults, if more than one unit is faulty
• Exact time of the occurrence of the fault
ABB Network Partner AB
Version 1.0-00
Generating signal:
INT--FAIL (reset event)
INT--FAIL (set event)
INT--WARNING (reset event)
INT--WARNING (set event)
INT--CPUFAIL (reset event)
INT--CPUFAIL (set event)
INT--CPUWARN (set event)
INT--ADC (reset event)
INT--ADC (set event)
INT--IOn (reset event)
INT--IOn (set event)
INT--RTC (reset event)
INT--RTC (set event)
INT--TSYNC (reset event)
INT--TSYNC (set event)
DREP-MEMUSED (set event)