Configuration, Setting And Sa System Tools; Release 2.0; Changes And Additions To Earlier Released Revisions - ABB REF 54 Series Technical Reference Manual, General

1MRS750527-MUM
8.2.2.
8.3.
8.3.1.
Feeder Terminal
Technical Reference Manual, General
Relay configuration
• Front connection for the Relay Product Engineering Tool Box CAP 505; the relay
configuration can be downloaded directly via a serial communication port on the
front panel of the feeder terminal.

Configuration, setting and SA system tools

The following tool versions are needed to support the new functions and features of
Release 1.5 revisions of REF 54_:
• CAP 505 Relay Configuration Tool; CAP 505 v. 1.1.0
• CAP 501 Relay Setting Tool; CAP 501 v. 1.0.0
• LNT 505 LON Network Tool; LNT 505 v. 1.0.1 D
• LIB 510 Library for MicroSCADA v. 8.4.2; LIB 510 v. 4.0.2

Release 2.0

Changes and additions to earlier released revisions

General
• Additional scaling factor for setting the displacement error of current and voltage
sensors. For further information refer to Section "Technical data of the measuring
devices" on page 39.
• Number of sensor types increased from 3 to 10 (each sensor channel can be set
separately).
• New measuring device and signal GE1...3 to be used with the MEAI1...8 function
blocks. For further information refer to the CD-ROM "Technical Descriptions of
Functions".
• Amount of measuring signal types for current and voltage increased:
• IL1b, IL2b, IL3b; can be connected to the MECU3B function block.
• U12b, U23b, U31b, U1b, U2b, U3b; can be connected to the MEVO3B
function block.
• Uob; can be connected to the MEVO1B function block.
• Improved storing, shorter storing time.
• New language versions:
• English - Swedish
• English - Finnish
• An informative parameter, "Config. capacity", added (Main menu/
Configuration/General/Config. capacity). For further
information refer to the Configuration Guideline (1MRS 750745-MUM).
• Menu descriptions of virtual I/Os changed to match the names in tools.
• 48-hour capacitor back-up for the internal clock of the feeder terminal.
• Selection of latching feature for the Start LED can be stored in the non-volatile
memory.
REF 54_
107