Show Ip Bgp Dampened-Paths - Dell C9000 Series Reference Manual

*>
0 200 i
Dell#show ip bgp 55.0.0.0/24
BGP routing table entry for 55.0.0.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
172.16.0.2 (172.16.0.2)
Weight
Communities :

show ip bgp dampened-paths

View BGP routes that are dampened (non-active).
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] dampened-paths
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
55.0.0.0/24
AS_PATH : 200
Next-Hop : 172.16.0.2, Cost : 0
Origin IGP, Metric
0, external
200:1 1000:1
(OPTIONAL) Enter the keywords vrf and then the name of the
VRF to view routes that are affected by a specific community list
corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keywords ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
• EXEC
• EXEC Privilege
172.16.0.2
Best
4294967295 (Default), LocalPref
3000:1
100,
Border Gateway Protocol 513