Default-Metric - Dell C9000 Series Reference Manual

default-metric

Allows you to change the metric of redistributed routes to locally originated routes. Use this command with
the redistribute command.
C9000 Series
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC
(MED) attribute for redistributed routes only.
Related
bgp always-compare-med
Commands
redistribute
Enter a number as the metric to be assigned to routes from
other protocols. The range is from 1 to 4294967295.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enables comparison of all BGP MED attributes.
— redistributes routes from other routing protocols into BGP.
Border Gateway Protocol 457