Dell C9000 Series Reference Manual page 531

Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information The following describes the show ip bgp path command shown in the following
example.
Field
Total
Address
Hash
Refcount
Metric
Path
Example
Dell#show ip bgp path
Total 16 Paths
Address
0x1efe7e5c
0x1efe7e1c
0x1efe7ddc
0x1efe7d9c
0x1efe7d5c
• ^ = (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches
on everything BUT the characters specified.
• $ = (dollar sign) the end of the output string.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the total number of BGP path attributes.
Displays the internal address where the path attribute is stored.
Displays the hash bucket where the path attribute is stored.
Displays the number of BGP routes using this path attribute.
Displays the MED attribute for this path attribute.
Displays the AS path for the route, with the origin code for the
route listed last. Numbers listed between braces {} are AS_SET
information.
Hash Refcount
15
71
127
183
239
Metric Path
10000 32 ?
10000 23 ?
10000 22 ?
10000 43 ?
10000 42 ?
Border Gateway Protocol 531