Dell C9000 Series Reference Manual page 520

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Usage Information The following describes the show ip bgp filter-list hello command shown in

the following example.

Dell#show run as-path a1

ip as-path access-list a1

Dell#show ip bgp filter-list a1

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0

BGP local router ID is 192.168.11.5

Status codes: s suppressed, S stale, d dampened, h history, *

valid, > best

Path source: I - internal, a - aggregate, c - confed-external, r

- redistributed

Origin codes: i - IGP, e - EGP, ? - incomplete

0 200 400 500 600 i

Introduced on the C-Series.

Lists the path sources shown to the right of the last AS number

in the Path column:

i = internal route entry

a = aggregate route entry

c = external confederation route entry

n = network route entry

r = redistributed route entry

Displays the next hop address of the BGP router. If 0.0.0.0 is

listed in this column, then local routes exist in the routing table.

Displays the BGP route's metric, if assigned.

Displays the BGP LOCAL_PREF attribute for the route.

Displays the route's weight.

Lists all the ASs the route passed through to reach the

destination network.

n - network,

Border Gateway Protocol

Chapters

Table of Contents