Dell C9000 Series Reference Manual page 202

Version
9.9(0.0)
9.2(1.0)
Usage Information To display these changes in the show bootvar command output, save the running
configuration to the startup configuration (using the copy command) and reload the
system.
To specify the IP address of the default next-hop gateway for the management subnet,
use the boot system gateway command.
Related Command show boot system
system.
cd
Change to a different working directory.
C9000 Series
Syntax
cd {flash: directory name/path | usbflash directory name/path}
From a PE console, use cd {flash: directory name/path | usbflash
directory name/path } to change to a different working irectory.
Parameters
directory
flash:
([[flash://]directory
_path])
Description
Introduced on the C9010.
Introduced on the Z9500.
— Displays information about boot images currently stored on the
(OPTIONAL) Enter one of the following:
• flash: (internal flash) or any sub-directory
• nfsmount://<mount-point>/filepath: NFS-
mounted path
NOTE: While switching to a remote NFS file system,
it is mandatory to specify the mount-point that
indicates the working directory on the NFS file
system. You cannot enter the root directory of the
remote NFS file system.
• usbflash: (USB Flash) or any sub-directory
Enter the internal directory name and the directory path.
File Management 202