Access control lists (ACLs) are supported on the Dell Networking operating system on the switch.
The following types of ACL, IP prefix list, and route maps are supported:
•
Commands Common to all ACL Types
•
Common IP ACL Commands
•
Standard IP ACL Commands
•
Extended IP ACL Commands
•
Standard MAC ACL Commands
•
Extended MAC ACL Commands
•
IP Prefix List Commands
•
Route Map Commands
•
AS-Path Commands
•
IP Community List Commands
NOTE:
The number of entries allowed in an ACL is hardware-dependent. For information on the
commands to use to re-allocate and display CAM memory space on the switch for Layer 2, IPv4, and IPv6
ACLs, refer to the
Content Addressable Memory (CAM)
NOTE:
For ACL commands that use the Trace function, refer to the Trace List Commands section in the
Security
chapter.
NOTE:
For IPv6 ACL commands, refer to
Topics:
•
Commands Common to all ACL Types
•
Common IP ACL Commands
•
Standard IP ACL Commands
•
Extended IP ACL Commands
•
ACL VLAN Group Commands
•
Common MAC ACL Commands
•
Standard MAC ACL Commands
•
Extended MAC ACL Commands
•
IP Prefix List Commands
•
Route Map Commands
•
AS-Path Commands
•
IP Community List Commands
Access Control Lists (ACL)
chapter.
IPv6 Access Control Lists (IPv6
ACLs).
Access Control Lists (ACL)
6
268