Setting Wi-Fi Parameters - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Video
request
handling
Step 2 Select Save.
----End

3.1.5 Setting Wi-Fi Parameters

To use your endpoint to implement video communication over a Wi-Fi network, set the Wi-Fi
parameters.
Setting Wi-Fi Client Parameters
When the Wi-Fi client function is enabled, your endpoint functions as a Wi-Fi client and
access an available Wi-Fi network after connecting to a wireless router.
Step 1 Choose Advanced > Settings > Network > Wi-Fi > Wi-Fi Client. Select Enable for the
Wi-Fi Client parameter.
Your endpoint automatically scans for available wireless routers and lists them in the
Wireless access point list box.
If you need to set a static IP address for your endpoint, go to
Step 2 Select Advanced. On the displayed Advanced Wireless Settings screen, set IP parameters
described in
Table 3-6 Wi-Fi parameters
Parameter
Connection type
Issue 01 (2013-09-30)
Description
Certificate.
Specifies how your endpoint handles
video requests from a remote endpoint
during a point-to-point SIP audio call or
multipoint conference.

Accept automatically: Your
endpoint automatically accepts video
requests from the remote endpoint.

Reject automatically: Your endpoint
automatically rejects video requests
from the remote endpoint.

Manual: Your endpoint prompts you
to accept video requests from the
remote endpoint.
Table 3-6.
Description
Specifies the mode in which
the endpoint obtains an IP
address.

Static IP: The network
administrator assigns an
IP address to the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Network
Setting
The default value is Manual.
Step 2. Otherwise, go to
Setting
The default value is
Dynamic IP.
Select Dynamic IP unless
special network
requirements are imposed.
Step 4.
28