Huawei TE40 Administrator's Manual page 86

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
Server
address
Conference
service
number
Enable
proxy server
Proxy server
address
Site number
User name
Password
Server type
Issue 01 (2013-09-30)
Description
servers.
NOTE
If you select this parameter, you must also set
Server address, Conference service
number, Site number, User name, and
Password.
Specifies the IP address or domain name
of the IMS server with which you want
the endpoint to register.
If you set this parameter to the IMS
server domain name, enable the domain
name server (DNS). If the DNS is not
enabled, enable Proxy server.
Specifies the conference service number
for your endpoint to initiate conferences
over an IP multimedia subsystem (IMS)
network.
Specifies whether to enable the proxy
server.
You must enable the proxy server when
using the IMS network.
Specifies the address of the proxy server.
If you set Server address to the IMS
server domain name, set this parameter
to the IP address bound to that domain
name.
Specifies the site number for your
endpoint.
If your endpoint registers with an IMS
server, endpoints that also register with
the IMS server can dial this site number
to call your endpoint.
Specifies the user name for
authentication registration.
Specifies the SIP server type.

OCS: Select this option if your
endpoint registers with the Microsoft
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
IP address example:
192.168.1.10
Domain name example:
huawei.com
It is recommended that you set
Server address to the domain
name of the IMS server with
which you want the endpoint to
register.
Set this parameter to the
conference service number
obtained from the IMS network
administrator.
Select this parameter.
Example: 192.168.1.10.
The parameter value must
contain only digits.
Example: 12345
The value can contain digits,
letters, and special characters,
such as @ # %.
Example:
+0867552842007@huawei.co
m
Obtain the value of this
parameter from the IMS server
administrator.
Set this parameter to Standard.
78