Joining A Conference Over A Wi-Fi Network - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
in the favorite conference list are displayed. Select the desired record and press the
the remote control to initiate a call.
If a site or conference name is a number, such as 9050, you can speak the digits 9, 0, 5, and 0 in
turn or nine thousand and fifty to initiate a call.

7.5 Joining a Conference over a Wi-Fi Network

The endpoint has a built-in Wi-Fi module and is able to function as a Wi-Fi client or Wi-Fi
hotspot. When the endpoint functions as a Wi-Fi client, you can place calls to remote sites.
Prerequisites
A Wi-Fi network is available.
Context
When functioning as a Wi-Fi client, the endpoint automatically scans for available wireless
access points. Alternatively, you can manually connect the endpoint to an available wireless
access point.
Do not place any obstacles between the endpoint and wireless access device. In addition, the distance between
the devices must not exceed 10 meters.
Procedure
Step 1 Choose Advanced > Set > Network > Wi-Fi > Wi-Fi Client. Select Enable to enable the Wi-
Fi client.
The endpoint automatically scans for available wireless access points and lists them in the Select
WLAN list box.
Step 2 From the list box, select a wireless access point to connect to. If a static IP address is required,
set it by referring to
Issue 02 (2014-01-15)
NOTE
Table
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-2.
7 Experiencing a Conference
key on
23